EK140连网络打印fec 2188000.ethernet eth0: Link is Down

zhangyihua · 发表于 2021-12-17 21:13:17

连上网线后串口一直打印如下信息，不能连接网络
fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fec 2188000.ethernet eth0: Link is Down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fec 2188000.ethernet eth0: Link is Down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

软件01 · 发表于 2022-1-6 09:50:14

烧写的ek140p还是ek140的dtb文件

zhangyihua · 发表于 2022-1-22 00:31:12

软件01 发表于 2022-1-6 09:50
烧写的ek140p还是ek140的dtb文件

烧写的是ek140的dtb,板子是MY-IMX6-MB140-MINI

帐号		自动登录	找回密码
密码			立即注册