283的spi接口

软件01

IMX283的CPU决定的，改不的了，不能自发自收，其他都可以

软件01

static struct spi_board_info spi_devboard_info[] __initdata = {
#if defined(CONFIG_SPI_MXS) || defined(CONFIG_SPI_MXS_MODULE)

  {

  /* the modalias must be the same as spi device driver name */

  .modalias = "spidev", /* Name of spi_driver for this device */

  .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */

  .bus_num = 1, /* Framework bus number */

  .chip_select = 0, /* Framework chip select. */

  .mode = SPI_MODE_0,

  },

#endif
你可以直接改班级文件的  .mode = SPI_MODE_0,或者去掉，在测试源码都可以测试吧