QT4.8.5 ARM平台移植编译问题？

软件01

deanji0 发表于 2016-12-5 20:47
(internal):1: Using OS scope before setting MAKEFILE_GENERATOR
(internal):1: Using OS scope before s ...

将arm-linux换成arm-none-linux-gnueabi试试，类似如下：
      #
             # qmake configuration for building with arm-linux-g++
             #

             include(../../common/g++.conf)
             include(../../common/linux.conf)
             include(../../common/qws.conf)

             # modifications to g++.conf
            QMAKE_CC = arm-none-linux-gnueabi-gcc
            QMAKE_CXX = arm-none-linux-gnueabi-g++
            QMAKE_LINK = arm-none-linux-gnueabi-g++
            QMAKE_LINK_SHLIB = arm-none-linux-gnueabi-g++

            # modifications to linux.conf
            QMAKE_AR = arm-none-linux-gnueabi-ar cqs
            QMAKE_OBJCOPY = arm-none-linux-gnueabi-objcopy
            QMAKE_STRIP = arm-none-linux-gnueabi-strip