明远智睿技术论坛

标题: EK140连网络打印fec 2188000.ethernet eth0: Link is Down [打印本页]

作者: zhangyihua 时间: 2021-12-17 21:13
标题: EK140连网络打印fec 2188000.ethernet eth0: Link is Down
连上网线后串口一直打印如下信息，不能连接网络
fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fec 2188000.ethernet eth0: Link is Down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fec 2188000.ethernet eth0: Link is Down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

作者: 软件01 时间: 2022-1-6 09:50
烧写的ek140p还是ek140的dtb文件

作者: zhangyihua 时间: 2022-1-22 00:31

软件01 发表于 2022-1-6 09:50
烧写的ek140p还是ek140的dtb文件

烧写的是ek140的dtb,板子是MY-IMX6-MB140-MINI

欢迎光临明远智睿技术论坛 (http://bbs.myzr.com.cn/)