linux3.0.5 烧录Qt4 文件系统会失败

jack

ModuleID[2] LevelID[10]: DeviceTypeDisk--_devices size: 2
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:1, Volume->_diskNumber:2
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:2, Volume->_diskNumber:2
ModuleID[2] LevelID[10]: DeviceTypeDisk--find Disk device: 02CFD200
ModuleID[2] LevelID[10]: Device::hubIndex::getmsc, return the port index is: 3
ModuleID[2] LevelID[10]: DeviceTypeDisk--_devices size: 2
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:1, Volume->_diskNumber:1
ModuleID[2] LevelID[10]: DeviceTypeDisk--find Disk device: 02CF5658
ModuleID[2] LevelID[10]: Device::hubIndex::getmsc, return the port index is: 1
ModuleID[2] LevelID[10]: DeviceTypeDisk--_devices size: 2
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:1, Volume->_diskNumber:2
ModuleID[2] LevelID[10]: Volume--StorageDisk, Disk->_driveNumber:2, Volume->_diskNumber:2
ModuleID[2] LevelID[10]: DeviceTypeDisk--find Disk device: 02CFD200
ModuleID[2] LevelID[10]: Device::hubIndex::getmsc, return the port index is: 3
ModuleID[2] LevelID[10]: VolumeDeviceClass::AddUsbDevice() failed I
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - VOLUME_ARRIVAL_EVT-Disk(I), Hub:0-Port:0

软件01

有没有串口打印信息啊，到哪里停了，开始烧写了嘛

jack

软件01 发表于 2016-12-22 09:41
有没有串口打印信息啊，到哪里停了，开始烧写了嘛

“push error”  烧录指导\01_MFG_tool\my-imax6-mfgtool-lib262\profile\linux\os firmware\image-linux-3035\rootfs-linux-qt4.tar.bz2
串口打印信息到这里停止了
usr/lib/libgio-2.0.so.0
usr/lib/libgstinterfaces-0.10.so
usr/lib/lib_g.726_enc_arm9_elinux.so.2
usr/lib/libncurses.so.5.3
usr/lib/libmenu.so.5.3
usr/lib/libOpenCL.so


MFGlog:

ModuleID[2] LevelID[10]: DeviceTypeDisk--find Disk device: 0313D530
ModuleID[2] LevelID[10]: Device::hubIndex::getmsc, return the port index is: 4
ModuleID[2] LevelID[10]: VolumeDeviceClass::AddUsbDevice() failed J
ModuleID[2] LevelID[10]: DeviceManager::OnMsgDeviceEvent() - VOLUME_ARRIVAL_EVT-Disk(J), Hub:0-Port:0