明远智睿技术论坛

标题: imx6ul 配置静态ｉｐ [打印本页]

作者: dengqiang2004 时间: 2017-3-28 17:18
标题: imx6ul 配置静态ｉｐ

配置如图，但是无效。按照这个配置，网线断掉，再插上，仍然是会获取动态ｉｐ,
不知哪里不对？

作者: 软件01 时间: 2017-3-28 17:42
cat /etc/network/interfaces
# Wired or wireless interfaces
# auto eth0
# iface eth0 inet dhcp
# iface eth1 inet dhcp

auto eth0
iface eth0 inet static
address 192.168.18.81
netmask 255.255.255.0

作者: 软件01 时间: 2017-3-29 09:39
root@myimx6ek336:/# cat /etc/network/interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
auto lo
iface lo inet loopback

# Wireless interfaces
iface wlan0 inet dhcp
      wireless_mode managed
      wireless_essid any
      wpa-driver wext
      wpa-conf /etc/wpa_supplicant.conf

iface atml0 inet dhcp

# Wired or wireless interfaces
# auto eth0
# iface eth0 inet dhcp
# iface eth1 inet dhcp

# Ethernet/RNDIS gadget (g_ether)
# ... or on host side, usbnet and random hwaddr
iface usb0 inet static
      address 192.168.7.2
      netmask 255.255.255.0
      network 192.168.7.0
      gateway 192.168.7.1

# Bluetooth networking
iface bnep0 inet dhcp

auto eth0
iface eth0 inet static
      address 192.168.18.81
      netmask 255.255.255.0

root@myimx6ek336:/# ifconfig eth0
eth0    Link encap:Ethernet  HWaddr 1C:87:76:51:61:1E
      inet addr:192.168.18.81  Bcast:192.168.18.255  Mask:255.255.255.0
      UP BROADCAST MULTICAST  MTU:1500  Metric:1
      RX packets:0 errors:0 dropped:0 overruns:0 frame:0
      TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

作者: 软件01 时间: 2017-3-29 09:43
USB识别为网口的方法：（加载完记得配置IP）
modprobe g_ether

欢迎光临明远智睿技术论坛 (http://bbs.myzr.com.cn/)