移植ubuntu到i.mx6ull --2
本帖最后由 myzr_soft 于 2019-8-7 08:43 编辑挂载根文件系统$ sudo sh ms.sh -m /home/myzr/image/ubrfs16.04.4/安装软件首先更新源/# apt update
更新完成，安装必要软件，这个根据需求安装就可以了。如： /# apt install sudo
/# apt install ssh
/# apt install ethtool/# apt-get install vim/# apt install net-tools/# apt install ifupdown/# apt install iputils-ping/# apt install rsyslog/# apt install htop/# apt install language-pack-en-base
用户配置设置root密码/# passwd root创建用户/# adduser myzr设置主机名称和本机IPecho "i.MX6" > /etc/hostnameecho "192.168.137.99 localhost" >> /etc/hostsecho "192.168.137.99 i.MX6" >> /etc/hosts配置串口和网络dhcp/# ln -s /lib/systemd/system/getty@.service /etc/systemd/system/getty.target.wants/getty@ttymxc0.service配置DHCP /# echo auto eth0 > /etc/network/interfaces.d/eth0/# echo iface eth0 inet dhcp >> /etc/network/interfaces.d/eth0/# /etc/init.d/networking restart退出根文件系统/# exit卸载根文件系统$ sudo sh ms.sh -u /home/myzr/image/ubrfs16.04.4/启动阶段可能遇到的问题：A start job is running for Raise network interface（5min 13s ）：http://bbs.myzr.com.cn/forum.php?mod=viewthread&tid=861&extra=
页:
[1]